Modify data line

Some models of cameras do not start up after being set to an interval greater than or equal to 5 minutes. This is related to the data cable, and we have relevant solutions. However, there are many SLR and micro-single models for users, and our controller cannot provide a unified data cable. Here we provide a simple data cable modification solution.

The original data cable usually has a metal shielding layer, which will affect the current output of the controller. We only need to peel off the outer skin of the data cable and cut the metal shielding layer, and the camera can be used normally.

（For Sony cameras, the data port has a charging function, so you need to modify the data cable. You can contact us to obtain the modification method.）